Echelon i.LON 100 e2 Internet Server Manuel d'utilisateur télécharger pdf (Page 61)

i.LON 100 Internet Server User’s Guide 4-19

The options on this page are divided into LonTalk Properties, NVE Driver

Properties, LNS Uplink/Downlink Properties, and Initiate LNS Uplink

Properties. These properties are discussed in the following sections:

Configuring LonTalk Properties

The following LonTalk properties are shown:

Neuron ID Range The range of Neuron IDs used by the i.LON 100.

This field is read-only.

Channel Type The LonWorks Channel type supported by the

i.LON 100. This is TP/FT-10 for FT model i.LON

100s and PL-20N (or PL-20C if CENELEC is

enabled) for PL model i.LON 100s.

Domain/Subnet/Node If the i.LON 100 is configured (i.e. it has been

added to an LNS network), this field displays the

Domain/Subnet/Node address of the i.LON 100.

Otherwise, this field will display Unconfigured.

By default, this field is read-only; check the

Modify? option to make this field writable. Note

that modifying the Domain/Subnet/Node address

of the i.LON 100 may make it inaccessible by the

LNS network.

CENELEC Enable This option only appears if you have a power-line

model i.LON 100. Set this option to enable

CENELEC power-line communication. If you

change this value, you will need to close all

applications to which the i.LON 100 is connected

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 95 96

Pas de commentaire

Echelon i.LON 100 e2 Internet Server Manuel d'utilisateur Page 61