Echelon PCLTA-21 Guide de l'utilisateur télécharger pdf (Page 27)

PCLTA-21 PCI Interface User’s Guide

• Loaded Image Size: the size, in bytes, of the currently-loaded PCLTA-21

system image. This may be zero if the PCLTA-21 card is in the initial boot

state.

• Interrupt Count: the number of interrupts the driver has processed for this

device. This value is set to zero when the device is physically reset.

Diagnostic Commands

The diagnostic commands are invoked by clicking one of the buttons displayed in

figure 3.6. If a diagnostic command results in the “Image file not found” error

message, close the Diagnostics dialog by clicking the OK button, then click the

Apply button in the PCLTA-21 control panel application. This re-initializes the

card and allows use of the diagnostic commands.

Figure 3.6 Diagnostics Dialog Box Commands

Test

The Test button retrieves status and error counts from the PCLTA-21 card. The

results of this message will be displayed in the format shown in figure 3.7.

Figure 3.7 Example Network Diagnostics Status Response

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Echelon PCLTA-21 Guide de l'utilisateur Page 27