Echelon i.LON 10 Ethernet Adapter Manuel d'utilisateur télécharger pdf (Page 54)

i.LON 10 Diagnostics

The i.LON 10 Ethernet Adapter provides two web pages that display diagnostic

information, the Status page and the Event Log page.

Viewing i.LON 10 Ethernet Adapter Status

You can check the status of the i.LON 10 Ethernet Adapter by clicking the Status

link from the Setup web page. The Status page appears as shown in the

following figure:

This web page displays the status of the i.LON 10. This information can be used

to troubleshoot communication problems or to verify settings. All information on

this page is read-only. This page contains the following information:

System Up Time The time since the last reset.

Load Average The load average as a percentage of the

maximum load over the last 5 seconds, 30

seconds, 5 minutes, and 30 minutes.

Firmware Version The current firmware version and the date

that firmware was built.

Neuron ID The i.LON 10 Ethernet Adapter’s 48-bit

Neuron ID expressed in hexadecimal.

Domain The L

ONWORKS Domain address of the i.LON

10 Ethernet Adapter. The length of this

7-2 i.LON 10 Ethernet Adapter Diagnostics

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 81 82

Pas de commentaire

Echelon i.LON 10 Ethernet Adapter Manuel d'utilisateur Page 54